ASTM F382-24 pdf download,Standard Specification and Test Method for Metallic Bone Plates. This specification and testing procedure aims to serve as a comprehensive reference for metallic bone plates utilized in the surgical internal fixation of the skeletal system. It establishes standardized methods for classifying and defining the geometric and performance attributes of bone plates. Additionally, the standard provides a catalog of specifications that detail material requirements, labeling and handling instructions, as well as standard testing methods for assessing mechanical characteristics deemed critical for the in vivo performance of bone plates. The purpose of this standard is not to establish performance...

ASTM E1050-24 pdf download,Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System. The present test procedure entails the utilization of an impedance tube, two microphone positions, and a digital frequency analysis system to measure the normal incidence sound absorption coefficients and the normal specific acoustic impedance ratios of materials. For the accreditation of laboratories conducting this testing method, a procedure is outlined in Annex A1. Values expressed in the International System of Units (SI) are considered the normative ones. This standard does not incorporate any other units of...

ASTM D1824-24 pdf download,Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates. 1.1 This testing procedure is intended for the assessment of plastisol and organosol viscosity at reduced shear rates. 1.2 The measurement of apparent viscosity at elevated shear rates is addressed by Test Method D1823. 1.3 The figures provided in the International System of Units (SI) are considered to be the normative values. The values presented within brackets are provided for reference purposes only.

ASTM D8559-24 pdf download,Standard Specification for Ambient Outdoor Air Quality Sensors and Sensor-Based Instruments for Portable and Fixed-Point Measurement. 1.1 This specification defines the performance standards for outdoor ambient air quality sensors, as outlined in Practice D8406. 1.2 This standard does not apply to sensors or devices that measure atmospheric pollutants through open paths, lidar, or imaging techniques. 1.3 This standard applies to sensors that can detect outdoor criteria pollutants in ambient air, including particulate matter (PM2.5 and PM10), sulfur dioxide (SO2), ozone (O3), carbon monoxide (CO), and nitrogen dioxide (NO2), at concentrations that are significant to public health. 1.4...

ASTM F2819-24 pdf download,Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing, and Wire to be Used for Medical Devices. 1.1 This standard ASTM F2819 outlines various testing methods for assessing the straightness of bars, rods, tubing, and wires. These methods are mainly intended for bars, rods, tubing, and wires that have been specifically ordered in a straightened and cut-to-length format. They are also applicable to small diameter tubing and wire that have been specially treated to unwind from a spool in a straightened form. 1.2 These testing methods are relevant for measuring the straightness of round wire...

ASTM D7426-24 pdf download,Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound. 1.1 This testing procedure pertains to the determination of glass transition temperatures (Tg) of materials through the use of differential scanning calorimetry. 1.2 This method is suitable for amorphous materials, including thermosets and semi-crystalline substances with amorphous regions, provided they are stable and do not experience decomposition or sublimation within the glass transition range. 1.3 The standard operating temperature range for this method is from –120 to 500°C, although this range may be extended based on the specific...

ASTM D5084-24 pdf download,Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter. The test procedures outlined here are formulated to evaluate the hydraulic conductivity, or permeability, of water-saturated porous materials using a permeameter with a flexible wall, within a temperature range of approximately 15 to 30°C (59 to 86°F). These procedures are applicable to a variety of specimen types, including intact, reconstituted, remolded, compacted, and others, as long as their hydraulic conductivity is below about 1 × 10^6 m/s (1 × 10^4 cm/s), adhering to the head loss criteria specified in 5.2.3....

ASTM D696-24 pdf download,Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between 30°C and +30°C with a Vitreous Silica Dilatometer. 1.1 This test protocol is designed for the assessment of the linear thermal expansion coefficient in plastics that have an expansion coefficient in excess of 1 µm/(m·°C), employing a glassy silica dilatometer. The plastics being tested must demonstrate a minimal level of creep or elastic strain rate, or a combination of both, during the test conditions and the forces applied, to guarantee that the measurement accuracy is not adversely affected by these characteristics. 1.1.1 When testing at...

ASTM D7647-24 pdf download,Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction. This test procedure is designed to assess the particle concentration and the distribution of particle sizes in both new and operational oils intended for lubrication and hydraulic applications. The particles under consideration fall within the size range of 4 µm (c) to 200 µm (c), with the upper boundary of this range varying depending on the type of automatic particle counter employed. Note 1: In the context of this...

ASTM C219-24 pdf download,Standard Terminology Relating to Hydraulic and Other Inorganic Cements. The present terminology document establishes definitions for various terms associated with hydraulic and other inorganic cements, including their constituents, inherent attributes, and physical properties, as well as the methodologies used to evaluate them. It should be noted that certain terms may have a broader scope of usage that extends beyond the confines of hydraulic cement alone. For specific terms that are predominantly relevant to individual standards, please refer to those standards for their definitions, which may be more stringent than the ones provided here. Additionally, each standard offers...